Yeop Jin | jby1007@midasit.com
Part 2The continuation of our September 15th GEN NX hands-on training in Athens
MIDAS GEN NX · Eurocode
MIDAS Academy · Hands-On Training
Eurocode Analysis & Design of Buildings in MIDAS GEN NX
The next step after September’s seismic workshop: the complete Eurocode workflow — from geometry and loads to analysis and member design.
Reserve Your Seat
Hands-on with
GEN NX · Eurocode
Part 1 · September 15thCompleted
Seismic Design & Analysis of a 3-Storey RC Building
Modelling, seismic loads and analysis results of an RC building.
Part 2 · This sessionOpen for registration
Eurocode Analysis & Design in GEN NX
The full workflow: geometry, Eurocode loads, analysis and design checks.
Workshop Overview
One Stop Solution for Building Structures — According to Eurocode
Building on the September session, this hands-on training follows the complete design workflow of a building in MIDAS GEN NX, using the Eurocode material and section databases, load codes and design checks.
Step by step, you will go from geometry and loads to analysis and Eurocode design — and see how GEN NX turns a structural model into verified, documented design results.
Attended Part 1? This session picks up where we left off. New to the series? You are just as welcome to join.
Don’t miss your chance to join — spaces are limited!
Eurocodes covered in GEN NX
- EC0Load combinations
- EC1Static wind load
- EC2Concrete frame, slab & wall design (ULS & SLS)
- EC3Steel frame design (ULS & SLS)
- EC8Static seismic load, response spectrum & capacity design
The Workflow
Four Steps, One Complete Model
The session follows the same four stages as a real design project.
01
Geometry
Fast, element-based modelling in an intuitive working environment.
- Automatic generation of columns and walls from storey data
- Eurocode material and section databases
- Rigid end offsets and panel zone effects
02
Loads
Building-specialised loading according to Eurocode.
- Static wind (EC1) and static seismic loads (EC8)
- Wind and seismic loads for flexible floors
- Earth pressures on basement walls
- Load combinations according to EC0
03
Analysis
Accurate analysis and clear, readable results.
- Response spectrum analysis according to EC8
- Dynamic analysis with non-participating basements
- An overview of advanced capabilities such as pushover and construction stage analysis
04
Design
Optimal, integrated design — from members to drawings.
- Concrete frame design and capacity design (EC2 & EC8)
- Slab and wall design with meshed elements, including punching shear
- Automatic drawing generation and design verification
Practical information
Your Trainer and the Venue
Trainer
Dimitris Mouroukis
Principal Bridge/Structural Engineer · OMIKRON KAPPA CONSULTING SA
Structural/Bridge Engineer, MSc, with over 22 years of national and international experience in major infrastructure projects, including bridges, stations, buildings, and tunnels. Specialized in structural and seismic design according to Eurocodes and international standards, with extensive experience leading multidisciplinary design teams from concept to detailed design.
Also led Part 1 in SeptemberVenue
The Atlas Room
Amerikis 20, 10671
Athens, Greece
Before you come
Required Steps Before the Workshop
To take part in the hands-on session, please complete the steps below before the event. This way you can start modelling from the very first minute — thank you for preparing in advance.
Required
1
Bring your laptop
Make sure it can run MIDAS GEN NX (a training license will be provided on the day).
Required
4
Activate your license
Activation details will be sent to the email registered with your MIDAS Member account – please check your inbox (and spam folder).
Recommended
5
Bring an external mouse
An external mouse is highly recommended for modelling comfort.
Registration
Reserve your seat for Part 2
Register below to secure your place at the MIDAS GEN NX hands-on training in Athens on October 20th, 2026.