<img height="1" width="1" style="display:none;" alt="" src="https://px.ads.linkedin.com/collect/?pid=5954820&amp;fmt=gif">
Would you like to sign out?
Cancel OK

    Ongoing Registration In Progress Closed
    LIVE WEBINAR
    PT Slab Analysis • RC / Composite Structures • ACI 318
     
    PT Slab Analysis and Design for RC/Composite Structures using MIDAS GEN NX – ACI 318
    DATE
    Wednesday, 23 September 2026
    TIME
    2:00 PM – 3:00 PM (IST)
    PLATFORM
    Live on GoToWebinar
    Register Now  →
       
    📝 OVERVIEW
    This webinar will demonstrate an integrated workflow for modelling, analysing, and designing RC/composite structures with post-tensioned slabs using MIDAS GEN NX. Participants will learn how to define tendon layouts, evaluate prestressing effects, perform strength and serviceability checks as per ACI 318, assess punching shear, and interpret critical slab-design results.
    WHAT YOU WILL EXPLORE
    01
    Model
    Define tendon layouts and model RC/composite structures with post-tensioned slabs using MIDAS GEN NX.
    02
    Analyse
    Evaluate prestressing effects and perform strength, serviceability, and punching shear checks as per ACI 318.
    03
    Interpret
    Interpret critical slab-design results and assess the performance of post-tensioned slabs.
    KEY LEARNING AREAS
    ✓ RC/composite structures with post-tensioned slabs
    ✓ Tendon layouts and prestressing effects
    ✓ Strength and serviceability checks as per ACI 318
    ✓ Punching shear assessment
    ✓ Critical slab-design results
    ✓ Integrated modelling, analysis, and design workflow
    Practical Focus: Apply an integrated workflow in MIDAS GEN NX to model, analyse, and design RC/composite structures with post-tensioned slabs, including tendon layouts, prestressing effects, ACI 318 checks, punching shear assessment, and critical slab-design results.
    📌 AGENDA
    01
    Modelling the RC Building with Post Tensioning Slabs
    Develop the building model and establish load transfer between PT slabs, columns & walls.
     
    02
    Defining Design Strips and Tendon Profiles
    Create support lines, design strips, tendon layouts & stressing parameters
     
    03
    Evaluating Prestress and Load-Balancing Effects
    Review tendon forces, precompression, balanced loads, and PT-specific load combinations.
     
    04
    ACI 318 Strength and Serviceability Checks
    Assess slab stresses, flexural capacity, deflection, and required reinforcement.
     
    05
    Verifying Punching Shear Performance
    Evaluate critical column–slab connections and identify governing punching-shear locations.
     
    06
    Interpreting Design Results and Reports
    Review stress ratios, reinforcement requirements, design checks, and calculation reports.
    🎙️ Meet the Speakers
    mohammad-zulfekhar-ali-image
    Er. Mohammad Zulfekhar Ali
    Sr. Technical Support Engineer
    MIDAS IT
    Mr. Mohammad Zulfekhar Ali is a Senior Technical Support Engineer at MIDAS IT India with a master’s degree in Structural Engineering and 5 years of experience in Finite Element Analysis, design, and detailing of reinforced concrete and steel structures. His expertise spans buildings, metro stations, foundations, transmission towers, retaining structures, and bridges. He has conducted numerous webinars, training sessions, and CPD workshops on advanced analysis topics, including pushover, time history, column shortening, and heat of hydration analysis. He is proficient in international design standards such as ACI, Eurocode, IS, and BS codes.
    View LinkedIn Profile →
    🎁 Attendee Benefit
    MIDAS GEN NX Trial
    MIDAS GEN NX Trial
    Get access to a 15-days trial license of GEN NX.
    MIDAS GEN NX Trial
    Participation Certificates
    Get participation certificates for MIDAS IT.