OVERVIEW
midas Gen and IDEA StatiCa interface allows you to utilize structural functions.
Let's get started on how to do the Steel Connection Design.
Firstly, it is necessary to check whether the license for "Export IDEA" is supported.
1) Run an analysis.
2) Run "IDA file..." in File > Export.
3) Modify the model names in a dialog box.
4) Click "Export".
1) Click "Steel" tap.
2) Run "Import from other program".
3) Check on the options.
4) Click "Close".
1) Click "Design Group".
2) Click the indicator 2.
3) Modify the group name and member type.
4) Modify the design members.
5) Click "OK".
If there are the load combinations generated in Gen, these combinations are automatically applied.
1) Click "Result Classes".
2) Click "Combinations".
3) Add or Modify the combinations.
[Joint Design]
1) Click "Joints".
2) Click "New".
3) Select the target Joint in the model window.
4) Click "OK".
5) Click "Design".
[Joint Design]
1) Modify the member properties and position.
[Joint Design]
1) Click "Apply" in Design tap > Template.
2) Select the connection detail in the template list.
3) Select the bolt type.
4) Click "OK".
[Joint Design]
1) Modify the connection information.
2) Click "Code Setup" in Design tap > CBFEM.
3) Modify the factor values for design.
4) Click "Calculate" in Design tap > CBFEM.
[Joint Design]
1) Click the "Check" tab.
2) Select the analysis result.
3) Select the element type.
4) Check the design result.
[Reporting]
1) Click the "Report" tap.
2) Select the type of design report.
3) For BOM, Click "BOM".
4) Select the output type.
[Drawing]
1) Click "DXF" and save as new name.
2) Import the dxf file in midas Drawing.