The latest Engineering Trends and Issues
Structure Insight Field_Structure Structure Type_Building Category_Knowledge
Structure Insight Rigid End Offset boundary condition elastic boundary element Degree of Freedom Element End Release Spring Support Field_Structure Structure Type_Building Category_Knowledge
OVERVIEW
Boundary conditions represent the status of connections between the structure and neighboring structures such as foundations. Boundary conditions are distinguished by nodal boundary conditions and element boundary conditions.
Nodal boundary conditions:
The constraint for the degree of freedom
Elastic boundary element (Spring support)
Elastic link element (Elastic Link)
Element boundary conditions:
Element end release
Rigid end offset distance (Beam End Offset)
Rigid link
Structure Insight Tension-Only Elements Truss Elements Compression-Only Elements Analysis Manual for Midas/Gen Two-Dimensional Axisymmetric Element Field_Structure Structure Type_Building Category_Knowledge
Project Tutorial Structure Insight High-rise building Low-rise building Construction Stage Analysis Structural Design Column Shortening Field_Structure Structure Type_Building Category_Knowledge Category_How-to
Structure Insight Seismic Analysis Seismic Loads Response Spectrum Analysis Nodal Body Force Static Seismic Field_Structure Structure Type_Building Category_Knowledge Category_How-to
Structure Insight moment redistribution Field_Structure Structure Type_Building Category_Knowledge Category_How-to Design Code_Eurocode
Structure Insight Seismic Analysis Pushover Analysis Seismic Load seismic design inelastic static analysis Performance Based Design Performance Based Seismic Design PBD Seismic Response Evaluation Field_Structure Structure Type_Building Category_Knowledge
Structure Insight Response Spectrum Model Response Spectrum RS Analysis Modal participation factor Field_Structure Structure Type_Building Category_Knowledge Category_How-to
Structure Insight Seismic Analysis Reinforced Concrete Seismic Load seismic design Structural Irregularity Field_Structure Structure Type_Building Category_Knowledge
Structure Insight Construction Stage Analysis Modeling During Construction boundary condition Field_Structure Structure Type_Building Category_How-to
OVERVIEW
There are cases where the design must be satisfied for two or more conditions for the same structure. In general, the design needs to be performed considering the load during construction and the load in use at the same time, as shown below. In this document, I will introduce how to perform two analyses simultaneously.
√ Page Contents
1. Modeling
2. Loading
3. The Setting of Boundary Condition
4. Running an Analysis
5. Running an Analysis: Checking Result-1
6. Running an Analysis: Checking Result-2
7. Running a Design
8. Combined Design Case
9. Running a Design: Checking Design Result
Structure Insight P-Delta Analysis Geometric nonlinearity Buckling analysis 2nd order effect secondary structural behavior P-Delta effect Field_Structure Structure Type_Building Category_Knowledge Category_How-to Design Code_AISC Design Code_BS Design Code_ACI
Structure Insight Buckling Assessment Buckling analysis buckling load linear buckling Field_Structure Structure Type_Building Category_How-to
Structure Insight beam design 1D Member Design Beam design force Field_Structure Structure Type_Building Category_How-to