Blog
The Latest Engineering Trends and Issues
ALL
- Project Application (13)
- MIDAS GTS NX (12)
- Deep excavation (8)
- Finite Element Method (7)
- Tunnel (7)
- #Slope Stability (6)
- #Unsaturated Soil (6)
- #TBM (3)
- Excavation Work (3)
- #Longitudinal Joints (2)
- #Metro station (2)
- Constitutive model (2)
- Finite Element Modeling (2)
- Limit State Design (2)
- Nonlinear Analysis (2)
- Slope Failure (2)
- Tunnel Design (2)
- pile foundation (2)
- #Concrete Lining (1)
- #Lining (1)
- #WaterTable (1)
- #cofferdam (1)
- #sheetpile (1)
- 3D FEM (1)
- 3d Geometry (1)
- Cement Admixed Clay (1)
- Complex Foundation (1)
- Construction Stage (1)
- Construction Stages (1)
- Cut and fill (1)
- Dam Analysis (1)
- Dam Design (1)
- Deep Cement Mixing Method (1)
- Dynamic Analysis (1)
- Element Distortion (1)
- FEM (1)
- Factor of Safety (1)
- Finite Element Analysis (1)
- Finite Element Mesh (1)
- Hardening soil model (1)
- Limit Equilibrium Method (1)
- Loading Combination (1)
- Retaining Structures (1)
- Retaining Wall Design (1)
- Retaining system (1)
- Root-Soil Interaction (1)
- Rubble Masonry Concrete (1)
- Seismic Analysis (1)
- Soil parameters (1)
- Strength Reduction (1)
- Struts (1)
- Subway Tunnel (1)
- Thermal Stress (1)
- Ultimate Limit State (1)
- Underground structure (1)
- Unsaturated Slope (1)
- mining excavation (1)
- room and pillar mining (1)
- settlement analysis (1)
- underground mining (1)
Blog | Room & Pillar Mine Stability Analysis by FEM
🖱️ Click to jump
Blog | Deep Mixing Method for a River Wall and Finite Element Simulation
The Application of Deep Mixing Method for a River Wall and Finite Element..
Blog | Analysis of a Deep Excavation in Diaphragm Walls on Surrounding Buildings
Analysis of a Deep Excavation in Diaphragm Walls, on Surrounding Buildings
Blog | Design of 20m Deep Excavation with Permanent Anchored SBPW and CBPW
Design of 20m Deep Excavation with Permanent Anchored Secant Bored Pile Wall..
Blog | Comprehensive Slope Stability Analysis and Design (LEM vs FEM)
🖱️ Jump to the contents1. Introduction
Blog | Modelling of the joints between segments in TBM tunnel (Part 2)
For a correct modelling of the joints between segments in a TBM tunnel
Blog | Modelling of the joints between segments in TBM tunnel (Part 1)
For a correct modeling of the joints between segments in a TBM tunnel
1. ..
Blog | Modeling Submerged Sheet Pile Cofferdam
Modeling submerged sheet pile cofferdam using midas GTS NX
Blog | Climatic Effect on Unsaturated Slope
Rainfall-Induced Slope Failure
Blog | Failures of unsaturated soil slopes
Adaption measures for rainfall-induced slope failures
based on unsaturated soil..
Publications | Response of the pile foundation during deep excavation
Location of monitoring stations
Publications | Influence of excavation foundation pit on existing tunnel
Plane position of foundation pit and subway tunnel
Blog | Eurocode 7: Geotechnical Design - How to apply Eurocode7 to FEM software?
If you haven't read the Eurocode series >> 1- What is Eurocode?2- Design..
Blog | The Advantages Of 3D Analysis In Major Fields
The Advantages of 3D Analysis in Major Fields
While the 2D approach has been a..
Blog | My secrets to making excavation drawing faster than you
👇 Watch the popular case study webinar
Blog | 5 Common tunnel designs to consider 3D effects
The most common cases to consider 3D effects in tunnel design
Blog | How to define the construction sequence?
Construction stage in geotechnical engineering
Blog | How to make excavation drawing in times of pandemic
👇 Watch the popular case study webinar
Blog | How to evaluate the seismic performance of structure
Evaluation of the seismic performance of geotechnical structure
Product Announcements | New release of midas GTS NX 2019(v2.1)
New release of midas GTS NX 2019(v2.1)
More Posts
